Motor Glider Lentus Thermik RR Multiplex

The Lentus Thermik is the latest addition to MULTIPLEX. This model was designed to evolve within a club with two strengths, thermal flight and slope flight.

Model delivered with servos, brushless motor, brushless controller, without battery, without landing gear or radio control.

The Lentus Thermik has been designed to evolve both in thermal flight on the plain and on the slope.
On this Lentus, Multiplex has integrated a multitude of innovative developments and it will delight you with its very healthy flight characteristics as usual at Multiplex.

It is visible here in flight.

Technical specifications:

- Span: 3m

- Length: 1.41m

- Weight: 2300 to 2600g

- Functions: Ailerons, steering, depth, engine, shutters

- Wing area: 44-49 g/dm2

- RC Functions: Steering, Depth, Motor, Ailerons, Shutter

- Optional: Retract gear and tow hook

- Flight time: about 30min without ascents.

- Designed to receive an optional specific landing gear (sold separately), this model, with a 4S 2600 battery and an 8x6 “ propeller, becomes autonomous, i.e. it is able to take off from the ground!
- Thanks to a modern profile, this model achieves very high performance and allows a dynamic flying style
- Healthy characteristics to spiral safely in the ascents
- Semi-scale reproduction inspired by the most modern gliders
- Transparent canopy with detailed cockpit
- Tow hook already in place, usable even in electric version, (requires 1 HS65HB servo sold separately)
- Possibility to mount Vario TEK (Display of speed and Vario data) (Sold separately)
- The wings with 4 control surfaces allow very precise landings (Butterfly)
- Heavy-duty wings with CFK-ALUMINUM double side members
- Connection of the servos contacts with M6 high-current sockets in the wings
- Removable steering flap, with groove hinges
- Extremely rigid fuselage in M-Space technology with a Ø20mm profile tube
- Control surfaces reinforced with stainless steel tubes
- Spacious and well-structured interior, for batteries, RC and telemetry (Sold separately)
- Quality decoration board with pre-cut patterns
- Impact resistant adhesive landing pad
- Protection of the leading edge integrated into the decoration board
- Carrying bag available for safe transport (Sold separately)
- Designed and manufactured in Germany

Product content:

- 1 MP Lentus Thermik RR assembled at 90%
- 1 ROXY C35-48-990kv brushless motor installed
- 1 ROXXY BL- Control 755 S-BEC controller installed
- 6 Hitec HS-65HB Servos installed
- 1 Set of M6 quick connect cord
- 1 Propeller with folding blades 11x7" and cone
- 1 Cabin
- Decoration laid
- Detailed assembly instructions

Requires:
- 1 Set 7 to 9 way radio control
- 1 X 3S 11.1V 2600mAh LiPo Battery with MPX plug
- 1 LiPo Charger

In case of using the optional landing gear, it takes 1 4S 14.8V 2600mAh LiPo battery with MPX plug and 1 8X6 propeller