Radio Tango GER

Radio Tango at TBS is a radio station designed specifically for FPV.

This radio all-in-one, integrates a video receive 5.8 GHz for 40 channels and allows you to use different module of JR show RC (not supplied) making it compatible with most radio receivers.

His design resulted is very ergonomic to guarantee you immediate access to all of the switches while driving.

Attention, this radio requires a module JR (Crossfire, Spektrum, FRsky etc.) for the part radio control RC .

Strengths :

A radio pre-set

The TBS Tango boasts the origin of many of the profiles pre-recorded which will match most of the flight controllers as Cleanflight, Naza, Pixhawk...
It has 10 channels offering you many possibilities for drones racers, but it can also be used for machines dedicated to the aerial camera view.
It is equipped with switches 2 and 3 positions, ideal for flight modes, arming of engine... but also the knobs used for the contröle of Tilt and Pan of a nacelle, for example.

A radio all-in-one

The TBS Tango is a radio FPV of a new kind. It integrates:

• An LCD screen anti-reflection coating, 4.2-inch 640x480p you access to the different settings of the radio, but égélament a video receiver 40 channels.

• A video receiver compatible with Boscam A / B / E, Airwave and RaceBand with a patch antenna TBS 5dbu, which will cover a field of 180 degrees to the front.

• A Bay JR is located at the back of the radio is scheduled to host a reception module RC indispensable in order to manage your model. You can choose between the GER Crossfire, modules, FrSky, Spektrum, Futaba and Graupner to suit your needs.

Technical Characteristics :

• Up to 10 lanes available
• Memory 15 models
• Video receiver 40 compatible Channels Pitmode
• Patch antenna 5dBi built-in to a very good reception
• Output CRSF and PPM through the module JR
• Sleeves mounted on bearings
• Radio with : 2x inter 3 positions, 2x inter 2 positions, 2 ports extensions, 4 trims, 1 wheel, navigation, 3 buttons to the setting of the video receiver
• Radio support Cleanflight/Betaflight, DJI NAZA V2, OpenPilot / Taulabs, Blade
• Module JR compatible : GER Crossfire, FRSky XJT, Spektrum DSM2 Air, ImmersionRC EzUHF
• Battery Li-ion 6000 mAh uSB rechargeable
• Update possible via the USB port

Attention, this radio requires a module JR (Crossfire, Spektrum, FRsky etc.) for the part radio control RC.