Approval S1 S2 S3 DJI Matrice 300 RTK - parachutes & circuit breaker FLYSAFE-M300

Kit ofDGAC approval for DJI M300 RTK allowing to have a drone approved S2 and S3.

The kit is composed of two modules circuit breaker and two parachute ultra-fast.

The system has a redundancy of the parachutes for a totally infallible system. The M300 lands on its feet, when the parachutes are triggered, to avoid the breakage of an arm, the payload, or a landing gear. Works correctly from a height of 10 meters thanks to the pyrotechnic technology borrowed from microlights.

The position of the center of gravity of the Matrix 300 RTK is preserved. The system takes advantage of a low coefficient of penetration into the air making it possible to generate no vibration at high speed and thus keep a perfect flight behavior.

Reliable, robust and lightweight high-tech materials.

The installation of the FLYSAFE-M3 system is feasible by the customer. The system does not change the integrity of the M300 RTK ; ita DJI manufacturer's warranty is retained. 

The FLYSAFE-M3 system does not obstruct any of the many sensors of the M300RTK; the DJI breakdown guarantee is retained. Indeed, if you obstruct a sensor of the drone, for example a lower sensor which is useful for altitude measurement and positioning of the drone, DJI will not accept to take care of a possible crash.

Flight scenarios S1, S2 and S3 possible with the DJI Zenmuse H20, DJI Zenmuse H20T, DJI Zenmuse L1 and DJI Zenmuse P1 payloads, or any other payload less than 1 kg.

Possible pairing of two remote controls to use the dual radio control functionality of the DJI Matrice 300 RTK